FREE WORLDWIDE SHIPPING

PRODUCT CARE

PRODUCT CARE

WHAT MOVEMENT DOES MY WATCH USE?

Depending on the model, our timepieces use one of the below three movements: 

- Manual Self-Wind 

- Automatic Self-Wind 

- Japanese Precision Quartz Movement

To find out what type of movement your watch has, see the 'Watch Specifications' section on it's product page. We recommend reading the below information before wearing your new ALS Watches timepiece to ensure you get the most out of your purchase. 

 

MANUAL WIND / AUTOMATIC WIND MOVEMENT

Wearing a mechanical timepiece is an homage to a time-honored art and tradition that dates back more than two centuries and allows one to see the intricate details on the movement in the dial. There are two types of Mechanical movements: 

1. Manual Self-Wind 

2. Automatic Self-Wind

Automatic Self-Wind watches use a semi-circular weighted rotor to generate motion. The normal movements from your arm and wrist cause the rotor to move back and forth which automatically wind the watch. Manual wind watches are similar to Automatics however they do not have an automatic rotor and therefore Manuals need to be wound more regularly.

 

HOW TO WIND YOUR MECHANICAL TIMEPIECE

1. For a self-winding watch to function properly, the mainspring must build up a sufficient power reserve. This is called the initiation process.  Without the initiation process, the watch will never operate properly or consistently. 

2. To initiate the power reserve, the watch must be wound manually.  Turn the winding crown at the 3 o’clock position, in a clockwise direction for about 20 revolutions. Ensure the crown is not pulled out, it should not move the hands. (Please do not continue to wind your timepiece you feel that the spring is already fully loaded otherwise the clockwork may be damaged).

3. After completion of the initiation process, the watch will wind itself automatically (rebuilding the power reserve) by means of an oscillation weight that shifts every time the watch’s position is changed by the action of the arm and wrist. Put on your watch and swing your wrist back and forth for approximately 30 seconds to initialize power reserve.

A self-winding watch should be worn at least 6-8 hours a day to maximize the power reserve.  If this is not possible, or if the watch has been off the wrist for more than 15-20 hours, the initiation process must be repeated. We hope this makes sense, if you have any issues please don't hesitate to ask.

For manual wind watches, you should wind your timepiece each morning or evening to ensure there are sufficient power reserves.

 

QUARTZ WATCHES

Our quartz timepieces use a Japanese Precision Movement. Quartz watches do not require winding. Before wearing, simply remove the plastic time stopper on the crown, which will activate the battery. Pull the crown/pin and set the correct time. 

 

STEEL BANDS: HOW TO REMOVE LINKS FOR A BETTER FIT

Our steel band watches have removable links to better fit your wrist. We strongly recommend taking your watch to a local watch repairer or jewelers who will be able to remove links very quickly for a small price. If you have the correct tools available, you can remove the links yourself. Here is a tutorial video which shows you how to remove steel band links. 

 

ARE YOUR TIMEPIECES WATER RESISTANT?

All of our pieces are at least 3ATM Water Resistant for daily usage only. A few drops of water will not damage a watch with a 3ATM rating, however wearing it in the shower or swimming will cause damage. To be safe, avoid contact with water as much as possible. Water damage is not covered under warranty.